6 | Electrical connection
30 / 52 80.06.415_iVario2-XS-iVarioPro2-S_IM_en_US
Notes
n
The cross-sections of the connection cables are based on the power con-
sumption and local regulations.
Color coding of the conductors
Observe the color coding of the conductors and country-specific deviations.
Color of the conductor Function of the conductor
Green Protective conductor
Black, red and beige Phase L1, L2, L3
RCD fault-current circuit breaker
All devices are installed with a protective conductor terminal. It may also be
necessary to include a fault-current circuit breaker type A or type B (RCD type
A, RCD type B) when installing the device to comply with country-specific
standards and regulations.
6.2 Opening the electrical compartment
WARNING
Device falls from the installation surface
Risk of crushing and injury if the device is tilted or turned.
n
Do not tilt the device on the installation surface.
n
When turning the device, ensure that the weight of the device is evenly
distributed and that the device is positioned completely on the
installation surface.
CAUTION
Sharp edges on the housing
Risk of cuts on the housing when working in the electrical compartment.
Wear protective gloves.
NOTE
The cover of the electrical cabinet is curved
To guarantee that the electrical cabinet seals evenly, the cover has a
preload. In dismantled state, the cover of the electrical cabinet curves.
To Next Page
Loading...
