Rational iVario Pro 2-S - Pan-fry

7 | Network connection
80.06.415_iVario2-XS-iVarioPro2-S_IM_en_US 41 / 52
7 Network connection
7.1 Notes on the network connection
Via the network connection, you can connect the device to your network in or-
der to connect the device to ConnectedCooking.
Ethernet connection (Local Area Network)
n
The device may be equipped or retrofitted with an optional Ethernet con-
nection.
n
The retrofit kit is available from the manufacturer under item number
87.01.643S.
n
Use a network cable of at least category 6 for connection to the network,
specification: CAT-6.
n
The network connection is located on the rear side of the device.
n
A detailed description of the connection to the network can be found in the
original operating manual.
WLAN (Wireless Local Area Network)
The WLAN adapter integrated in the device is a market-dependent option that
is not available in every country.
n
For devices from the iVario 2-XS series, WLAN is available as an option.
n
The devices from the iVario Pro 2-S series have WLAN as standard.
7.2 Connecting the device to the network
Connecting the Ethernet cable (LAN)
1. Unscrew the LAN connection.
2. Unscrew the cap.
3. Remove the sealing plug.
4. Push the Ethernet cable through the union nut.
5. Push the Ethernet cable through the rubber grommet.
6. Push the rubber grommet back into the clamp ring.
7. Connect the Ethernet cable to the connector.
8. Screw on the connection.
9. Tighten the cap.
>> The Ethernet cable is connected and can be used.