Instruction manual
RAVTD3000 - RAVTD3000HP
RAVTD3000NRC - RAVTD3000ATS
Code M0215 - rev.1.1
(11/2012)RAVAGLIOLI S.p.A.
Page 24/52
RAVAGLIOLI S.p.A. - Via I° Maggio, n° 3 (Pontecchio Marconi)
40037 Sasso Marconi (Bologna - Italy)
Tel. 051/ 67.81.511 – Fax 051/ 84.64.67 E-mail: rav@ravaglioli.com
(***) The system takes some seconds to complete the correct target recognition. During this
phase and during the following measuring phases, the symbols displayed on the bottom right
side of the screen show the progress of the 4 target recognition. See legend below.
= Target NOT recognized (GREY symbol)
= Target recognized and in the process of being optimized (GREY symbol)
= Target recognized and optimized / invalid measures (YELLOW symbol)
= Target recognized and optimized / valid measures (GREEN symbol)
= Target not required in this phase (BLACK symbol)
ALWAYS take special care when positioning the vehicle on the lift. It should be as centred as
possible to speed up and optimise both target search and connection and the following
measuring operations.
To Next Page
Loading...
Need help?
General
