Raven MTi - Layout 8.2 Bus to Premade Sends

RAVEN CUBASE/NUENDO BASIC LAYOUT USER MANUAL |
33
LAYOUT 8.2 “BUS TO PREMADE SENDS”
FX 1 SEND 2 CHAN SET
In the Project window, after creating an FX 1 send, select another track and press FX 1 SEND 2 CHAN SET to load the
FX 1 send to Send 2 of your selected track. This Batch Command operates in the following order:
- Opens up the Channel Settings window tab
- Cursor over to Send 2
- Opens the Sends window
- Selects FX1 from the list
Note: The Channel Settings window should be closed before running this command.
FX 2 SEND 3 CHAN SET
In the Project window, after creating an FX 2 send, select another track and press FX 2 SEND 3 CHAN SET to load the
FX 2 send to Send 3 of your selected track. This Batch Command operates in the following order:
- Opens up the Channel Settings window tab
- Cursors over to Send 3
- Opens the Sends window
- Selects FX2 from the list
Note: The Channel Settings window should be closed before running this command.
FX 3 SEND 4 CHAN SET
In the Project window, after creating an FX 3 send, select another track and press FX 3 SEND 4 CHAN SET to load the
FX 3 send to Send 4 of your selected track. This Batch Command operates in the following order:
- Opens up the Channel Settings window tab
- Cursors over to send 4
- Opens the Sends window
- Selects FX3 from the list
Note: The Channel Settings window should be closed before running this command.