RAVEN MTX/MTi CUBASE/NUENDO BASIC LAYOUT 2 of 8
LAYOUT 2.1 “FADES”
REMOVE FADES
Press
REMOVE FADES
to remove any fades on the selected region/event.
CROSS FADE
Press
CROSS FADE
to create a cross fade between two connected regions/events.
FADE IN 10MS
Press
FADE IN 10MS
to create a 10ms fade at the start of the selected region/event.
Note: be sure the Info Line is showing.
FADE OUT 10MS
Press
FADE OUT 10MS
to create a 10ms fade at the end of the selected region/event.
Note: be sure the Info Line is showing.
To Next Page
Loading...
Need help?
General
