Raven MTi - Page 113

RAVEN CUBASE/NUENDO BASIC LAYOUT USER MANUAL |
36
ADD STEREO ROOMWORKS SEND A
In the Project window, with the Channel Settings window closed, press ADD STEREO ROOMWORKS SEND A to load a
new stereo FX track with RoomWorks preloaded to Send 1 of your selected track. This Batch Command operates in
the following order:
- Opens up the Channel Settings window
- Sends a mouse-click to Send 1
- Selects “add” from the menu
- Selects “RoomWorks” from the Effect dropdown menu on the new FX track window
ADD STEREO ROOMWORKS SEND B
In the Project window, with the Channel Settings window closed, press ADD STEREO ROOMWORKS SEND B to load a
new stereo FX track with RoomWorks preloaded to Send 2 of your selected track. This Batch Command operates in
the following order:
- Opens up the Channel Settings window
- Sends a mouse-click to Send 2
- Selects “add” from the menu
- Selects “RoomWorks” from the Effect dropdown menu on the new FX track window
ADD STEREO DELAY SEND C
In the Project window, with the Channel Settings window closed, press ADD STEREO DLEAY SEND C to load a new
stereo FX track with Stereo Delay preloaded to Send 3 of your selected track. This Batch Command operates in the
following order:
- Opens up the Channel Settings window
- Sends a mouse-click to Send 3
- Selects “add” from the menu
- Selects “Stereo Delay” from the Effect dropdown menu on the new FX track window
ADD STEREO DELAY SEND D
In the Project window, with the Channel Settings window closed, press ADD STEREO DLEAY SEND D to load a new
stereo FX track with Stereo Delay preloaded to Send 4 of your selected track. This Batch Command operates in the
following order:
- Opens up the Channel Settings window
- Sends a mouse-click to Send 4
- Selects “add” from the menu
- Selects “Stereo Delay” from the Effect dropdown menu on the new FX track window