22
5) RATE CHANGE ALARM ON/OFF
a) Display will show
RATE CHANGE ALARM ON
.
b) Depressing momentarily changes the display between RATE CHANGE ARLAM
ON
and
OFF
.
A value of
ON
means alarm is enabled; a value of
OFF means alarm
is disabled.
c) Momentarily depress to advance to GPS FILE REFERENCE.
4) DISPLAY SMOOTHING ON/OFF
a) Display will show
DISPLAY SMOOTHING ON
.
b) Depressing momentarily changes the display between
DISPLAY SMOOTHING
ON and
OFF
.
A value of
ON
means smoothing is enabled; a value of
OFF
means
smoothing is disabled. Selecting DISPLAY SMOOTHING ON means the display shows
target rate when actual rate is within 10% of the target rate. Selecting DISPLAY
SMOOTHING OFF means the display shows actual target rate.
c) Momentarily depress to advance to RATE CHANGE ALARM ON/OFF.
1) Definition of Data Menu Key:
Depressing this key displays selected Data Menu features.
EXAMPLE: Display will display options by name and default setting.
Depressing this key after selecting DATA MENU increments up through desired features.
EXAMPLE:
PRINT FIELD BEGIN
,
ALARM ON
,
DISPLAY SMOOTHING ON
,
etc
.
Depressing this key after selecting DATA MENU increments down through desired
features.
EXAMPLE:
PRINT FIELD BEGIN
,
DATA-LOG OFF
,
DATA LOG TRIGGER
UNITS FEET
,
etc
.
3) AUDIBLE ALARM ON/OFF
a) Display will show
ALARM ON
.
b) Depressing momentarily changes the display between
ALARM ON
and
ALARM OFF
.
A value of
ALARM ON
means the audible alarms are enabled; a value
of ALARM OFF means the audible alarms are disabled.
c) Momentarily depress to advance to
DISPLAY SMOOTHING ON/OFF.
2) CONSOLE DATA PRINTOUT
a) Display will show
PRINT FIELD BEGIN.
1) To Print Field Begin, depress .
b) Display will now show
PRINT FIELD END.
1) To Print Field End, depress .
2) While PRINT FIELD END is displayed, if Field Begin is required, depress
to toggle the display to PRINT FIELD BEGIN.
c) Momentarily depress to advance to AUDIBLE ALARM ON/OFF.
To Next Page
Loading...
Need help?
General
