Chapter 4: Customising the ST5000 Plus
33
Data Displayed as
Course Over Ground COG
Speed Over Ground, Knots SOG KTS
Cross Track Error XTE
Distance to Waypoint DTW
Bearing to Waypoint BTW
Rudder Gain RUDD GAIN
Response RESPONSE
Watch WATCH
Universal Time Constant UTC
There are 3 depth pages and 2 water temperature pages. Data is
displayed in the units defined by the selected page.
The default settings are:
Data Default New
Page Setting Setting
1 XTE Cross Track Error
2 BTW Bearing to Waypoint
3 DTW Distance to Waypoint
4 NOT USED
5 NOT USED
6 NOT USED
7 NOT USED
• For each setup page, scroll forwards or backwards through the
available data pages, using the +1 or -1 keys.
Note: If you set a page to NOT USED, it is omitted from the display
cycle during normal operation. For example, with the default page
settings only three pages are displayed in the sequence.
136_3c04.p65 14/06/99, 10:1633
To Next Page
Loading...
