Chapter 5: Installation
51
Cabling
1. Route the fluxgate compass cable back to the control head.
2. Connect the five core cable (colour for colour) to the Compass
terminals.
D3282-1
5.4 Rudder reference transducer
A rudder reference transducer is supplied with the ST5000 Plus
SailPilot. This device provides the autopilot with accurate information
on the position of the rudder.
Mounting position
• The rudder reference transducer should be attached to a suitable
base adjacent to the rudder stock.
136_3c05.p65 14/06/99, 10:1751
To Next Page
