Raymarine ST5000+ - Drive Unit Cabling

56 ST5000 Plus SailPilot Owner’s Handbook
Drive unit cabling
The SailPilot drive unit has electrical connections for both the motor
and the clutch.
Use a suitable cable (refer to the following table) to connect the drive
unit to the ST5000 Plus Control head (as shown).
Cable length Copper area AWG
Up to 2.5 m (8 ft) 2.5 mm
2
14
Up to 4 m (13 ft) 4.0 mm
2
12
Up to 6 m (19.5 ft) 6.0 mm
2
10
Up to 10 m (32 ft) 10 mm
2
8
Up to 16 m (32 ft) 16 mm
2
6
D902b-2
Red
Blue Red
Black
SailPilot Linear
Drive Unit
136_3c05.p65 14/06/99, 10:1756