50 ST5000 Plus SailPilot Owner’s Handbook
6ft (1.8m)
4ft (1.2m)
4ft (1.2m)
Installing the fluxgate compass
Attach the fluxgate compass to a bulkhead using the four self-tapping
screws provided.
Vertical
D193-1
Note: A label is supplied to warn people that the compass is mounted
behind or below the bulkhead. This label should be attached where it
can be clearly seen.
136_3c05.p65 14/06/99, 10:1750
To Next Page
Loading...
