74 ST5000 Plus SailPilot Owner’s Handbook
Position information not received
• Navigator not transmitting the correct position data.
The autopilot will not auto advance to the next waypoint
• No bearing to waypoint information received from the navigator.
A series of rotating dashes are displayed on screen
• Compass deviation correction is running.
The display shows a series of stationary dashes
• Data is not being received – check the cabling.
The display shows “NO DATA”
• The signals received from the navigator are too weak – refer to the
navigator handbook for further action.
• Wind trim data is not available – check the connection to the wind
transducer.
136_3c08.p65 14/06/99, 10:1774
To Next Page
Loading...
