Chapter 3: Installation 15
Chapter 3: Installation
This chapter describes how to install the ST60 Multi instrument, and when
supplied, the Auxiliary Alarm.
For advice, or further information regarding the installation of this equipment,
please contact the Raymarine Product Support Department or your own National
Distributor.
3.1 Planning your installation
Before starting the installation, spend some time considering the best position for
the equipment, such that the
Site Requirements
and the
EMC installation
guidelines
(below) are satisfied.
Site requirements
4.33 in (110 mm)
0.95 in
(24 mm)
0.6 in
(15 mm)
3.54 in (90 mm)
diameter
4.53 in (115 mm)
4.85 in (123 mm)
0.25 in
(6.2 mm)
1.4 in
(35 mm)
3.54 in (90 mm)
diameter
4.85 in (123 mm)
D5785-4
ST60 instrument dimensions
With standard
bezel
With low
profile bezel
81039_4.book Page 15 Wednesday, March 24, 2004 3:14 PM
To Next Page
Loading...
