12 ST600R Autopilot Control Unit
2.6 SeaTalk Data Pages
The ST600R can display 21 “pages” of SeaTalk data, grouped into 6
“chapters” (see opposite page).
Changing Chapters
The key is used to cycle through the chapters. The chapter title
(for example, SPEED) is displayed for 2 seconds, then the first page
in the chapter is displayed.
Cycling Pages
The key is used to cycle through the pages in the current chapter.
Once a Data Page is selected, this page becomes the principle
autopilot display. The autopilot mode displays (Standby, Auto,
Track, Vane and Manual) then become “pop-ups”, and are
displayed for 5 seconds when the autopilot mode is changed or a
course change is made.
• Press to display each Data Page in turn.
• To return to a previous Data Page, press for 1 second. You can
continue to move backwards through the Data Page sequence in this
way.
• If the required data for a page is not available, dashes are displayed
instead of a value.
• Most displays are repeated data and cannot be adjusted. The
exceptions are the Response and Rudder Gain pages, which can be
adjusted using the +1 and -1 keys (refer to section 3.3 for the
alternative method of adjusting the Response/Gain).
• The autopilot bar graph remains in use.
• The “direction-to-steer” arrows relate to the Data Page information.
To Next Page
Loading...
