54
ST600R Autopilot Control Unit
6.2 Connections
The cable connections depend on the autopilot to which you are
connecting the remote unit. The following sections show the
connections required for:
• ST1000 and ST2000 Plus autopilots
• ST4000 Plus and ST5000 Plus autopilots
• ST6000 Plus control unit
• Type 100/300 Course Computer
If you have purchased SeaTalk cable fitted with connectors at both
ends, one of these connectors will have to be removed, and the bare
end stripped back to reveal the red, yellow and screen wires.
ST1000 and ST2000 Plus Autopilot Connections
The ST600R can also be connected to any available SeaTalk
instrument as well as the autopilot. For details of the pin connections,
please refer to the appropriate autopilot handbook.
To Next Page
Loading...
