65
Chapter 7: Post Installation Procedures
To perform the deviation correction:
1. Make sure that the autopilot is in Standby mode with the drive unit
engaged.
2. Press and hold the STANDBY key for 2 seconds to display the User
Setup entry page.
stdby
Entering Setup
STDBY
SETUP
Setup Screen
Normal Operation
If “CAL LOCK” is displayed, you need to turn off the lock feature
contained in Dealer Setup (see Chapter 5).
3. Press the
key to move on to the Swing Compass page.
Compass Deviation
SWINGSWING
COMP
ASS
4. Press the +1 or -1 key to change the setting from OFF to YES. The
Turn Boat page is then displayed after 1 second.
Compass Deviation
TURN
BOAT
TURN
BOAT
TURN
BOAT
TURN
BOAT
To Next Page
Loading...
