3131
ITALIANOENGLISH
PRECAUTIONS FOR 230V.AC
CABLE-OPERATED MACHINES
DANGER!
N
EVER OPERATE WITH THE CONNECTING CABLE COMPLETELY EXTENDED, ABOVE ALL WITH UNATTENDED MACHINES, TO AVOID
TRIPPING. ENSURE THAT THE PLUG IS EQUIPPED WITH REQUIRED EARTHING.
DANGER!
D
ANGER MAY ARISE DURING OPERATION IF THE MACHINE PASSES OVER THE POWER CABLE.
ATTENTION!
PERIODICALLY INSPECT THE POWER CABLE TO NOTE ANY SIGNS OF DAMAGE. SUBSTITUTE IF DAMAGED.
ATTENTION!
DO NOT PARK OR LEAVE THE MACHINE UNATTENDED ON INCLINED FLOORS.
D
O NOT USE OR STORE THIS MACHINE IN DAMP AREAS OUTDOORS. THIS MACHINE HAS BEEN DESIGNED FOR COLLECTIVE USE, FOR
EXAMPLE IN HOTELS, SCHOOLS, HOSPITALS, FACTORIES, SHOPS, OFFICES AND IN RESIDENCES. TAKE CARE THAT THE ROTATING
BRUSH DOES NOT ENTER INTO CONTACT WITH THE POWER CABLE. REPLACE THE POWER CABLE ONLY WITH THE TYPE SPECIFIED IN
THE INSTRUCTION MANUAL. SWITCH OFF THE MACHINE IMMEDIATELY IN THE CASE OF ANY FOAM OR LIQUID LEAKS. CLEAN THE WATER
LEVEL LIMITING DEVICE REGULARLY ACCORDING TO INSTRUCTIONS AND VERIFY THAT THERE ARE NO SIGNS OF DAMAGE.
IF THE POWER CABLE IS DAMAGED, IT MUST BE REPLACED WITH ANOTHER CABLE OR A SPECIAL CABLE ASSEMBLY AVAILABLE FROM
THE MANUFACTURER OR FROM YOUR TECHNICAL ASSISTANCE SERVICER.
DANGER!
THE POWER CABLE MUST BE REPLACED BY MANUFACTURER-QUALIFIED PERSONNEL OR BY YOUR TECHNICAL ASSISTANCE
SERVICER.
To Next Page
Loading...
