Redline Connect Series - Serial Interface Ports (DATA 1 & DATA 2); Ethernet Ports (ETH 1 & ETH 2); Table 6: Features - Pinout for Data1; Data 2 Port 232;485; Table 7: Features - DATA Port Leds

CONNECT-OWS Installation Guidelines
70-00200-02-00 Proprietary Redline Communications © 2014 Page 18 of 70 December 3, 2014
Figure 5: Description - Connect-OWS DATA 1/2 and CON Port Pin Assignment
Serial Interface Ports (DATA 1 & DATA 2)
The DATA 1 and DATA 2 ports (RJ-45 socket) are serial interface ports.
The following table lists the pinout for the DATA 1 and DATA 2 ports.
Table 6: Features - Pinout for Data1 / Data 2 Port 232/485
Pin
Description
232
485 HD1
485 HD2
485 FD1
485 FD2
1
RI
-
-
-
-
2
DCD
-
-
-
-
3
DTR
-
-
-
-
4
GND
GND
GND
GND
GND
5
RxD
D+
-
Tx
Rx
6
TxD
-
D+
Rx
Tx
7
CTS
D-
-
Tx
Rx
8
RTS
-
D-
Rx
Tx
Table 7: Features - DATA Port LEDs
Pin
Description
Active
On
Gateway active - no data flow
Blink
Gateway active - data flow detected
Off
Gateway not active
RS-485
On
RS-485 mode
Off
RS-232 mode
Ethernet Ports (ETH 1 & ETH 2)
The ETH 1 and ETH 2 ports (RJ-45 socket) are 10/100Base-T Ethernet interface ports
for customer use.
Figure 6: Description - Connect-OWS ETH 1 and ETH 2 Port Pin Assignment