Redline Connect Series - Poe Port (Ethernet;Power); Ethernet Ports (ETH 1 & ETH 2); Table 8: Features - Pinout for ETH Ports; Table 9: Features - ETH Port Leds

CONNECT-OWS Installation Guidelines
70-00200-02-00 Proprietary Redline Communications © 2014 Page 19 of 70 December 3, 2014
The following table lists the pinout for the Ethernet ports.
Table 8: Features - Pinout for ETH Ports
Pin
Description
1, 2
Data Pair 2
3, 6
Data Pair 3
4, 5
N/C
7, 8
N/C
Table 9: Features - ETH Port LEDs
Pin
Description
LINK ACT
On
Link active - no data flow
Blink
Link active - data flow detected
Off
Link not active
100
On
100Base-T mode
Off
10-Base-T mode
PoE Port (Ethernet/Power)
The Ethernet port (RJ-45 / F connector) conducts DC power and provides Ethernet
connectivity with the Connect-OW wireless terminal. The Ethernet port connects to the
PoE adapter using a weatherproof CAT-5e Ethernet cable.
Ethernet Ports (ETH 1 & ETH 2)
The ETH 1 and ETH 2 ports (RJ-45 socket) are 10/100Base-T Ethernet interface ports.
Figure 7: Description - Connect-OWS ETH 1 and ETH 2 Port Pin Assignment
The following table lists the pinout for the PoE and Ethernet ports.
Table 10: Features - Pinout for PoE and ETH Ports
Pin
Description
PoE
ETH
1, 2
Data Pair 2
Data Pair 2
3, 6
Data Pair 3
Data Pair 3
4, 5
+Ve (out)
N/C
7, 8
-Ve (out)
N/C
Table 11: Features - ETH Port LEDs
Pin
Description
LINK ACT
On
Link active - no data flow
Blink
Link active - data flow detected
Off
Link not active
100
On
100Base-T mode
Off
10Base-T mode