Redline Connect Series - Serial Gateway Settings; Table 16: Site Survey - Serial Gateway Settings; Table 17: Site Survey - Serial Gateway Settings

CONNECT-OWS Installation Guidelines
70-00200-02-00 Proprietary Redline Communications © 2014 Page 27 of 70 December 3, 2014
3.3 Serial Gateway Settings
The Connect-OWS features two configurable serial ports (RS-232/422/485) and two
Ethernet ports. It is recommended to evaluate and record the requirements for each of
these ports prior to installation. The following table is provided as a guideline.
Table 16: Site Survey - Serial Gateway Settings
Setting
DATA 1 Port
DATA 2 Port
Alias
Port Type
Bitrate
Parity
Databits
Stopbits
3.4 Serial Gateway Settings
The following settings are used to configure operation for each of two serial gateways.
Table 17: Site Survey - Serial Gateway Settings
Serial Gateway 1
Serial Gateway 2
Gateway Settings
Gateway Mode
COM Port Binding
Data Packing
Packet Length
Force Transmit
(msec)
Enable Delimiter 1
Delimiter 1 (value)
Enable Delimiter 2
Delimiter 2 (value)
Delimiter Action
TCP Server Settings
Local TCP Port
Max. Connections