Redline Connect Series - DC Power Connections; Ground Lug; Dimensions; Table 12: Features - Input Power Connector Pinout

CONNECT-OWS Installation Guidelines
70-00200-02-00 Proprietary Redline Communications © 2014 Page 20 of 70 December 3, 2014
DC power Connections
The DC supply connections are located on the front panel. This is a keyed Buchanan
796864-4 (or equiv.) connector. Dual isolated floating power supply inputs are provided
to accommodate deployments with backup power (e.g., A + B battery banks). All power
inputs include overvoltage and reverse polarity protection.
The following table lists the pinout for the power connector.
Table 12: Features - Input Power Connector Pinout
Pin
Description
-V1
-Ve power input #1
+V1
+Ve power input #1
-V2
-Ve power input #2
+V2
+Ve power input #2
Ground Lug
A #10 ground-lug is provided on the Connect-OWS chassis. Use this connection to
terminate a grounding wire. All Connect-OWS systems must be properly grounded.
Dimensions
The Connect-OWS dimensions are: (h-w-d) 51 x 174.7 x 181 mm (2 x 6.88 x 7.13 in).
Figure 8: Features: - Connect-OWS Dimensions