Redline Connect Series - Page 64

CONNECT-OWS Installation Guidelines
70-00200-02-00 Proprietary Redline Communications © 2014 Page 64 of 70 December 3, 2014
1
Utilities->
Product Options
Options Key
Enable operational
mode, throughput
setting, etc.
2
Configuration->
System Name
Name for wireless
terminal
System
TCP/IP
Address
TCP/IP address and
netmask. Enter IP
address and netmask or
enable DHCP.
3
Configuration->
Channel Size
Enter channel size used
on base station.
Wireless
RF Freq.
Enter frequency used on
base station.
Tx Power
Set the initial RF power
during registration.
Antenna Gain
Enter the manufactures
gain value (dBi) (DFS-
enabled systems only).
Important: The items in the table are required for basic installation. Based on the
Options Key installed, other features may be available that require configuration. Refer
to the RDL-3000 Family User Manual for additional information.