10
Cleaning and Maintenance
To prevent electrical shock, unplug the MESA from AC power and remove the battery.
For the display, wipe gently with a soft cloth. A small amount of ethyl alcohol or a neutral detergent may
be used. Please exercise caution when handling hazardous chemicals.
For general cleaning and decontamination, use a damp cloth with a mild soap solution. For more
thorough decontamination, a small amount of 70% isopropyl alcohol could be used.
Operation
The MESA 2.0 has been designed for quick and easy deployment. Depending on the application, some
adjustments to the default setting may be needed.
The MESA 2.0 is a swept spectrum analyzer featuring a bar graph representation of the spectrum and is
used to locate transmitters by monitoring the RF signal strength. When searching for unknown
transmitters, it is advised to remove or disable any known transmitters from the target sweep area (i.e.,
unplug, turn off, or remove any wireless transmitting devices including Wi-Fi and Bluetooth devices,
laptops/PCs, mobile phones, wireless transmitting devices, etc.), as any transmitting devices can hinder
detection of unknown transmitters.
Setup & Use
A hand strap is provided on the side of the MESA. When using the product in a hand-held manner, hold
the unit securely by sliding a hand under the hand strap and gripping the side of the unit. The hand strap
and probe grip can be swapped if preferred.
A built-in stand is provided to allow for hands-free support on a tabletop or surface. To release the
stand, pull the bottom of the stand away from the MESA unit until it releases from the built-in clips.
Continue extending the stand to its furthest position. Place the MESA on a sturdy, level surface resting
on its back edge and the stand.
To Next Page
Loading...
Need help?
General
