REI mesa 2.0 User Manual

11
Inserting the Battery
The battery-operated MESA provides for truly hand-held, portable spectrum analysis. To insert a
battery:
1. Locate the battery door latch on the rear of the MESA near the bottom edge of the unit.
2. Supporting the MESA unit with both hands, place a thumb on the battery door latch.
3. Simultaneously press on the battery door latch while sliding it away from the unit.
4. Once the battery door is lifted, place a thumb under the edge of it and open it up fully.
5. Slide the battery into the battery slot observing proper contact alignment. Press until the
battery is fully seated. Do not force the battery into the slot; resistance may indicate improper
battery alignment.
6. Close the battery door until the edge lines up with the lip on the battery door latch. Then place
fingers and thumb on both the battery door and the latch and press them close together.

REI mesa 2.0 Specifications

General

Brand	REI
Model	mesa 2.0
Category	Measuring Instruments
Language	English