16
Directional Antenna (70 MHz - 500 MHz)
This flag-shaped antenna provides directional coverage for lower-frequency signal detection. It is a
powered probe and must be used with one of the powered connector cables (see page 19).
Locator Probe (20 MHz - 6 GHz)
The Locator Probe is omnidirectional and is attenuated for use in high RF environments and for locating
an RF signal to within a few inches.
Visible Light / Infrared Probe (10 kHz - 50 MHz)
The Visible Light / Infrared Probe can be used for detecting the presence of IR or visible light. This probe
is a powered probe and must be used with one of the powered connector cables (see page 19).
To Next Page
Loading...
