37
The RSSI option in the Mode Settings Menu turns the RSSI feature on. The spectrum portion of the graph
will be compressed and displayed on the top half of the screen. The RSSI feature will be displayed on the
bottom half of the screen.
The two vertical lines in the spectrum (pictured below) represent the RSSI Window or the area of the
spectrum whose relative signal strength is represented by the RSSI graph. The spectrum can be panned
or zoomed in/out to adjust the frequency span being monitored.
The RSSI Window can be adjusted by tapping/selecting the Configuration button in the RSSI graph. Use
the slider bar to adjust the window.
The amount of time represented in the horizontal span on the graph can be adjusted by tapping the
Configuration button in the RSSI graph. Select the desired time option by tapping the button.
To close the RSSI graph, tap the "x" in the upper right-hand corner of the RSSI graph.
To Next Page
Loading...
