76
6) View Histogram
From the Detail View, the received signal strength can be viewed over time by pressing the RSSI
Hist button. The Detail View screen is still visible above the histogram window. Selecting the
gears icon brings up a Timespan box to allow selection of the desired time period visible in the
histogram window. To close the histogram view, press the “x” button in the top right of the
window.
7) Classification
Devices can be also classified from the Detail View as “Friendly”,
“Threat”, “Unknown” or “Inactive” from the Detail View screen.
Simply tap on the desired ID designation in the ID box to the left of
the RSSI bar graph.
To Next Page
Loading...
Need help?
General
