87
Open a Previously Saved Signal List
It is possible to open a signal list that was previously saved on the MESA.
1) Ensure that the previously saved signal list (in CSV format) is on a USB thumb drive (see pg. 100)
that is inserted into one of the USB ports on the MESA.
2) If the signal list table is not open, select "Signal List" from the Mode Settings Menu.
3) Press the File Dialog button.
4) From the file list, select the file (.csv) to be opened.
5) Select the Open button.
6) A dialog box will confirm the successful import of the saved signal list. Press "OK" to close this
dialog box.
Hiding a Signal List
To hide a currently displayed signal list, press the "X".
Note: The signal list is still open in memory; it is just hidden from the display. When powering down is
attempted, the MESA will ask if it should save the signal list.
To Next Page
Loading...
