ReliOn Micro - Meter Error Codes and Troubleshooting; Battery, Temperature, and Faulty Meter Errors

68
Step 2: Hold down the button for 2 seconds to
display the most recent test result. If you have turned
the result average display on, the result average will
appear instead of the most recent result.
Step 3: Press the button to go to the ‘End’ screen.
Step 4: Hold down both the and buttons for
5seconds.‘dEL’and‘ALL’willalternatelyashon
the screen.
To cancel this function at this point, press the button.
Step 5: Hold down the button for 5 seconds.
The ‘End’ screen appears again, once all test results
are deleted from the memory.
To turn off the meter, hold down the button for
2 seconds. The meter turns itself off if buttons are
not pressed within 3 minutes.