10A-58
ENGINE AND CYLINDER BLOCK ASSEMBLY
Exchanger: Removal - Refitting
K9K
10A
a Clip the "intermediate pipe - compressor" connec-
ting pipe fitted with a new seal onto the air conditio-
ning compressor.
a Refit:
-the bolt for the "intermediate pipe - compressor"
connecting pipe onto the air conditioning compres-
sor,
-the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection).
-the engine undertray,
-the front section of the front wheel arch liners (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
-the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
-the engine cover,
a Perform the following operations:
-fill the cooling system (see 19A, Cooling, Cooling
circuit: Draining - Refilling, page 19A-17) ,
-bleed the cooling circuit (see 19A, Cooling, Coo-
ling circuit: Draining - Refilling, page 19A-17) ,
-fill the refrigerant circuit using the refrigerant char-
ging station (see Coolant circuit Draining - Re-
filling) (62A, Air conditioning).
To Next Page
Loading...
