SLIDING REAR BENCH SEAT (2/3)
The seat may be folded down to enable
bulky objects to be transported.
To fold down the seatbacks
Special features of the triptic rear
bench seat
This must be in the three-seater con-
figuration (refer to the information on
“Triptic rear bench seat” in Section 3).
Any sliding rear bench seat
Lower the rear headrests (refer to the
information on the “Rear headrests” in
Section 1).
Pull lever 3 and lower large seatback B
or pull lever 4 and lower small seat-
back C.
Check that the rear seat
belts are positioned and op-
erating correctly each time
the rear seat is moved.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
The 2-seater bench seat
position with large seat-
back B folded down pre-
vents seat position C from
being used, as it is not possible to
fasten the seat belt (buckle 5 cannot
be accessed).
3
4
B C
C
5
B
C
B
To Next Page
Loading...
