Renesas RZ/T2M

All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Electronics Corp. without notice. Please review the latest information published by
Renesas Electronics Corp. through various means, including the Renesas Electronics Corp.
website (http://www.renesas.com).
RZ/T2M Group
Renesas Starter Kit+ for RZ/T2
M
User’s Manual
Rev.1.00 Apr 2022
32
RZ/T Series for Real-Time Control
RZ
Family
6
4-Bit & 32-Bit Arm
®
-Based High-End MPUs
32
User
’
s Manual
www.renesas.com

Renesas RZ/T2M Specifications

General

Brand	Renesas
Model	RZ/T2M
Category	Computer Hardware
Language	English

Summary

Renesas Starter Kit+ Overview

RSK+ Purpose

Explains the purpose of the RSK+ as an evaluation tool for Renesas microprocessors.

RSK+ Key Features

Lists the evaluation features provided by the RSK+, including programming and debugging.

Power Supply Requirements

CPU Board Power Input

Details the external voltage input requirements for the CPU board, including connectors.

Board Layout and Specifications

Board Component Layout

Shows the top component layout of the development board with labels.

Board Dimensions and Connectors

Provides the physical dimensions and connector positions of the board in mm.

Connectivity Interfaces

Internal Board Connectivity

Illustrates the internal board component connectivity to the MPU via a block diagram.

Emulator Connection Diagrams

Shows diagrams for connecting external emulators and J-Link OB to the CPU board.

User Circuitry Components

Switches: Push and DIP

Details the function and connection of push and DIP switches on the CPU board.

Board LEDs

Lists the 20 LEDs on the board, their colors, functions, and pin connections.

Ethernet Port Connections

Describes the three Ethernet PHY ICs and their MPU connections for RGMII interface.

System Configuration

Jumper and Configuration Settings

Explains solder bridges, trace cuts, and pin header jumper types and their default configurations.

MPU Operating Modes

Details option links and switch settings for configuring MPU boot and operating modes.

External Bus and Flash Configuration

Details option links associated with configuring the external bus and NOR flash interfaces.

Ethernet Configuration

Details option links associated with configuring the Ethernet interface (ETH0, ETH1, ETH2).

Header Pin Assignments

Application Headers (JA1-A, JA2-A, JA3-A)

Lists connections for application headers JA1-A, JA2-A, and JA3-A.

Pin Headers (CN1, CN2, CN3)

Lists connections for pin headers CN1, CN2, and CN3 for MPU pin access.

Code Development and Debugging

MPU Boot Mode Support

Explains MPU boot modes and configuration procedures and precautions.

Additional Information

Document Appendix