Installation and users guide - English
ASSOCIATED SYSTEM HANDBOOKS
Description Part No.
H-2000-5044
H-2000-5073
H-2000-5062
H-2000-5057
Optical module machine (OMM)
MI 12 interface unit
Optical machine interface (OMI)
PSU3 power supply unit
SAFETY
Before working inside machines, ensure
machine is in a safe condition
Switch off power before making electrical
connections, changing probe and receiver
settings and replacing components
WARRANTY
Equipment requiring attention under warranty
must be returned to your supplier. No claims
will be considered where Renishaw equipment
has been misused, or repairs or adjustments
have been attempted by unauthorised persons.
CHANGES TO EQUIPMENT
Renishaw reserves the right to change
specifications without notice.
CNC MACHINE
CNC machine tools must always be operated
by competent persons in accordance with
manufacturers instructions.
CARE OF THE PROBE
Keep system components clean and treat the
probe as a precision tool.
PROBE IP RATING X8
PATENT NOTICE
Features of MP10 probes and features of
similar probes are the subject of one or more of
the following patents and/or patent
applications:
EP 0337669
EP 0390342
EP 0695926
JP 2,945,709
JP 2,944,401
US 5,150,529
US 5,040,931
US 5,669,151
To Next Page
Loading...
