Renishaw PH10 - Summary of IEEE Configuration Switches

28
Probing system output (RS232 and IEEE)
6.7.2 Summary of IEEE configuration switches
Table 17 presents a summary of the PHC10-2 IEEE configuration switch settings and functions.
Table 17 - Summary of IEEE configuration switches
Switch Function Up Down See section
Communications
1
2
3
4
5
Device address
(1-30)
See table 6 5.3
6
7
8
Parallel poll bit (1-
8)
9 None Default position = down
10 Probe reset time 2 (extended) 1 (standard) 6.5
Interface
11 PICS configuration
PPOFF - active
during PH10 index
PPOFF - inactive
during head index
6.1
12
HCU1 probe DAMP
and probe reset
buttons
Enabled Disabled 6.3
13
14
None Default position = down
15
16
Output
configuration
PICS DIN 6.4
17
18
Interface
connection
PICS or 7-pin DIN
operation
5-pin DIN operation
only
6.2