Renkforce RF100 - d) Setup of the Software - Mac OS

32
d) Setup of the Software - Mac OS
• Itisimportantthatyoumaketheprinter’sproleavailabletothesoftwarebeforeyouconnectprinterandcomputer.
1 After installation, locate the
“Cura”iconinthe“Applications”
folderofyourcomputerandright
click it. Select “Show Package
Contents”.
2 Locate “Resources/machine_
proles”.
3 Locatethe“RF100.ini”prolele
on the SD card and copy it to
“machine_proles”folder.
4 Startthe“Cura”application.
5 In“Machine“menu,select“Add
newmachine...“.