Renkforce RF100 - Product Overview, Features, and Setup; 3. Intended Use

5
3. Intended use
The3Dprintercomespre-assembledandisreadytouse.ItcanbeoperatedviaPCusingtheincludedsoftwareor
viatheintegrateddisplay.Thepowder-coatedmetalhousingensuresalongservicelife.Theproductprintsobjectsup
toasizeof100x100x100mmandisequippedwithabrightLEDlightthatallowsyoutomonitortheprogressofthe
print.Thereareover100ready-to-print3DmodelsontheSDcard,whichcanbeprintedoutbyfewclicks.
The3Dprinterisonlyapprovedforconnectiontoa100-240V/AC,50/60Hzmainssocket.Itisdesignedonlyfor
homeuse.
Itisintendedforindooruseonly.Contactwithmoisture,e.g.inbathrooms,mustbeavoidedunderallcircumstances.
Forsafetyandapprovalpurposes,youmustnotrebuildand/ormodifythisproduct.Ifyouusetheproductforpurposes
otherthanthosedescribedabove,theproductmaybedamaged.Inaddition,improperusecanresultinshortcircuits,
res,electric shocksor otherhazards. Readthe instructionscarefullyandstoretheminasafeplace.Makethis
productavailabletothirdpartiesonlytogetherwithitsoperatinginstructions.
Allcompanynamesandproductnamesaretrademarksoftheirrespectiveowners.Allrightsreserved.
Up-to-date Operating Instructions, 3D model les, conguration les:
Download the latest operating instructions, 3D model les and conguration les at
www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the
website.
4. Delivery content
• 3Dprinterfully-assembled
• 250gGenuineRenkforcelament
(1,75mm,white)
• 8GBSDcardwith
- Manual
- “Cura“ Software
- USB driver
- Over100ready-to-print3Dmodels
- Congurationles
• Power cable
• Quick-Start-Guide
• Filamentspoolholder
• Filament tube
• USB cable
• Scraper
• Tweezers
• Side cutter
• 2Hexkeyswith2screws
• Glassbuildbedpreinstalledwithadhesive
surface
• 3xGenuineRenkforcelamentsamples
(copper,woodandelasticmaterial-1.75mm-
50geach)