en
25
InstallationIndications, functions and optionsMessages Commissioning Operation and function
12. Maximum speed:
Î Adjust the maximum speed MAX of the relay.
Carry out this adjustment for relay 2 as well, if
necessary (see page 42).
Note
The maximum speed value will not be avail-
able if ONOF has been selected in the
sub-channel REL (REL2).
Commissioning
Î Complete the commissioning menu by
pressing the right button (✓):
The controller is then ready for operation and nor-
mally the factory settings will give close to optimum
operation.
Note
The adjustments carried out during commis-
sioning can be changed anytime in the cor-
responding adjustment channel. Additional
functions and options can also be activated or
deactivated (see page 26).
Set the code to the customer code before
handing over the controller to the custom-
er (see page 51).
To Next Page
Loading...
Need help?
General
