Packaging, Transport and Installation
10
3 Packaging, Transport and Installation
3.1 Packaging
The packaging has been adapted to the mode of transport. It complies with the
generally applicable packaging guidelines.
Storage of packaging
– In the event of a complaint or return, your warranty claims may be
endangered if the packaging is inadequate or the machine has not been
secured correctly.
• Please keep the packaging for the duration of the warranty period.
Transport
– Mechanical or electronic components may be damaged.
• The machine may not be knocked, shaken or thrown during
transport.
3.3 Temperature fluctuations and condensed water
Temperature fluctuations
The machine may be subject to strong temperature fluctuations during transport
(e.g. aircraft transport)
– The resultant condensed water may damage electronic components.
• Protect the machine from condensed water.
3.4 Conditions for the Installation Site
Ambient temperature: 5°C to 40°C
Ambient temperature
– Electronic and mechanical components may be damaged and the
performance data alter to an unknown extent.
• Do not exceed or fall below the permitted temperature range of the
machine (5°C to 40°C / ambient temperature).
Atmospheric humidity:
Maximum relative humidity 80% at temperatures up to 31°C, decreasing linearly up to 50%
relative humidity at 40°C
To Next Page
Loading...