4 Technical Data
4.1 Use of the Device for the Intended Purpose
Target group: Owners/managing operators, operators
Machine type designation: SM 200
This heavy-duty cutting mill serves to grind flexible, hard-ductile and fibrous products and
product mixtures in batches or continuously. It is fundamentally not designed for grinding wet or
moist materials. The special shape of the cutting tools in conjunction with the drive enables a
fast, efficient grinding without adversely affecting the material to be ground.
Special features
The new heavy-duty cutting mill is convincing in difficult size reduction tasks where other cutting
mills fail. The device allows a particularly effective preliminary size reduction of heterogeneous
material mixes, such as waste or electronic components. Analytical fineness is usually attained
in one step. The cutting mill is used successfully for a great variety of other materials also,
whereby the sample material is only heated to a very low temperature and so the mill is also
suitable for grinding temperature-sensitive materials.
The large selection of sieves, hoppers and collecting vessels allow adaptations to individual tasks.
- fast, gradual size reduction by 18 cutting plates arranged in a helical pattern
along the circumference of the rotor
- parallel section rotor
- cutting tools made of high-quality materials
- high level of operating convenience due to central lock and operator panel
- consistent operational reliability in all user-relevant equipment components
- versatility in use due to a variety of devices and a large number of
accessories
- powerful size reduction owing to a high-torque 2.2-KW motor
- optimised cutting effect by double-acting cutting bars
- very fast cleaning thanks to hinged enclosure with smooth surfaces and
push-fit rotor
- defined final fineness due to bottom sieves with aperture sizes 0.25 - 20 mm
To Next Page
Loading...