Damage to hearing
The level of noise can be high depending on the type of material,
the knife used, the speed set and the duration of the grinding
process.
- Noise that is excessive in terms of level and duration can cause
impaired or permanently damaged hearing.
• Ensure suitable sound-proofing measures or wear
hearing protection.
Noise measurementin accordance with DIN 45635-31-01-KL3.
Immission at 1-m spacing:
- approx. 66 dB (A) at idle speed
During size reduction, depending on the sample material:
- approx. 75 to 92 dB (A) with peaks of up to 98 dB
4.3 Degree of Protection
– IP54
4.4 Motor rotation speed
The rated speed of the motoris 1500 rpm.
4.5 Receptacle Volume
The receptacle volumeis < 5 l and is expandable by accessories to up to 26 l.
4.6 Rated Power
– 2200 W
4.7 Dimensions and Weight
In closed state: (with standard hopper)
Height: 1675mm
Width: 576mm (1090 mm with open hopper)
Depth: 760mm
Weight: approx. 120kg
Weight without rotor and without hopper: approx. 90kg
To Next Page
Loading...