Retsch SM200 - Assembling and using the cyclone; Cyclone assembly

Assembling and using the cyclone
32
7 Assembling and using the cyclone
7.1 Cyclone assembly
CAUTION
V0014
Injuries to limbs
Rotating blade
– Can cause injury to hands and feet.
• Keep hands and feet away from the device openings
when the device is switched on.
• Pull the plug out before cleaning or retrofitting.
CAUTION
V0001
Risk of injury to fingers
Reaching into the turning rotor
– Unintended reaching into the grinding area and the turning
rotor.
• Never connect the device to the mains without the
discharge flange.
• Only operate the device with discharge flange.
Fig. 18: Removing the discharge flange
• Disconnect the device from the mains.
• Loosen the screw (A1).
• Pull off the discharge flange (AV).
A1
1
AV
1