REXON RL-502 - Auto Power off; Scan CTCSS Setting; Scan DCS Setting

PAGE 15
stand by mode�
Auto Power Off
In menu mode, press button to select
item 11 until the LCD shows “APO” char, press to
enter the function and press to select from
OFF, 10M, 30M, 1H or 2H
Press button to conrm and return to menu mode, press
for other setting or press button comes back to
stand by mode�
Scan CTCSS Setting
In menu mode, press button to select
item 12 until the LCD shows “CTSCAN” char, press
to enter the function and press to select
scanning direction
Press button to conrm and return to menu mode, press
for other setting or press button comes back to
stand by mode�
At scanning mode, the channel has a CTCSS code, the LCD appears the code,
press
to confirm this code and press PTT key to talk.
Scan DCS Setting
In menu mode, press button to select
item 13 until the LCD shows “DCSCAN” char, press
to enter the function and press to select
scanning direction
Press button to conrm and return to menu mode, press
for other setting or press button comes back to
stand by mode�