REXON RL-502 - Burst Tone 1750 Hz; Channel Spacing Selection; Auto Repeater Setting

PAGE 20
The operation is just for channel or memorised mode.
Burst Tone 1750Hz
In menu mode, press button to select
item 26 until the LCD shows “1750” char, press to
enter the function and press to select
transmitting timing from (OFF/1000/2000/3000/4000/5000 ms),
Press button to conrm and return to menu mode, press
for other setting or press button comes back to
stand by mode�
Channel Spacing Selection
In menu mode, press button to select
item 27 until the LCD shows “W/N” char, press to
enter the function and press to select from
NAR/WID
Press button to conrm and return to menu mode, press
for other setting or press button comes back to
stand by mode�
* NAR: Channel Spacing 12.5KHz
* WID: Channel Spacing 25KHz
Auto Repeater Setting
In menu mode, press button to select
item 29 until the LCD shows “ARS” char, press to
enter the function and press to select
from On/O
Press button to conrm and return to menu mode, press
for other setting or press button comes back to
stand by mode�