11
8 DATA SAVING / LOADING / DISPLAYING
8.1 Save parameters to the system
All the changes made to the parameters will be updated and saved after pressing EXIT on the setup screen, the
system will also give a text message screen as shown below.
8.2 Display the trip and season totals
When the truck is stopped (no ground speed present), Press TOTAL to display the trip and season totals.
Pressing RESET will clear the TRIP TOTALS, while the SEASON TOTALS can only be cleared in the program
setup screen.
8.3 Save parameters to USB
Press DATA, insert program key and follow the hints on screen. Once “USB FOUND” appears, pressing
SPARA will save all the parameters on the USB key with the file name that includes the Region and Truck ID
names.
===============================
SAVE CONFIGURATION
KEEP POWER ON!
===============================
LOGGING DATA or PARAMETERS
INSERT USB
TRIP SEASON
SDT: 1KM 1KM
DST: 1KM 1KM
QTY: 100KG 100KG
RESET DATA QUIT
Total quantity
Total distance
Total spreading distance
To Next Page
Loading...
