Need help?Do you have a question about the REXROTH CS 550i and is the answer not in the manual?
General| Brand | REXROTH |
|---|---|
| Model | CS 550i |
| Category | Controller |
| Language | English |
Steps to configure and save unique operational profiles for the truck.
Calibrating ground speed using truck or GPS speed data.
Calibrating ground speed by counting wheel pulses over a distance.
Automated procedure for nulling valve outputs by ramping motor speeds.
Calibrating the gate manually by setting its maximum height.
Calibrating the gate by adjusting its actual position on the truck.
Calibrating the gate automatically using up/down controls.
Calibrating solid material spread by setting gate position and measuring output.
Configuring the wireless network connection for the system.
Calibrating joystick solenoids to ensure proper function and output.
To Next Page
