44/44
Bosch Rexroth Canada ı May.2018 ı Revision 7.0
22.1 Multi-Axis Single Stick
1. Turn PGM key to program
2. Select MODE
3. Move joystick to minimum desired output and PRESS MIN
4. Move joystick to maximum desired output and PRESS MAX
5. Repeat step 2-4 for all the modes and functions
6. Turn off the PGM key to save the settings
22.2 Dual Sticks
1. Turn PGM key to program
2. Move joystick to minimum desired output and PRESS MIN
3. Move joystick to maximum desired output and PRESS MAX
4. Repeat step 2-3 for all the modes and functions
5. Turn off the PGM key to save the settings
23 Warning
This glass LCD touch screen display has been extensively tested and validated against its
intended use. This glass could crack and break if the display is dropped on to a hard
surface or receives substantial impact. If the glass chips or cracks, discontinue use and
contact Bosch Rexroth Canada to have it replaced - do not touch or attempt to remove the
broken glass. Any misuse/abuse causing damage, whether intended or not, will become the
sole responsibility of the owner/buyer which will render the warranty of this product, void.
Notes:
To Previous Page
Loading...
Need help?
General
