21/44
Bosch Rexroth Canada ı May.2018 ı Revision 7.0
Speed alarm – alarm will sound when the set speed is exceeded.
Temp Comp – Temp compensation, per three degree change
Check Marks:
btPS – Set spreader to PAUSE mode at power up
SimRvs – Enable simulated anti-icing in ‘Spinner Reverse’ mode
mBlast – Option to set Blast to momentary action
Dimr – Screen auto dimmer
GPS/AVL – GPS tracking, require a serial cable (R987376776) and a GPS receiver
Puck (R987380745), or AVL interface.
W/L – Prewet and Anti-icing operation interlock with an asymmetrical valve
Auger – Once checked the gate change is disabled
mode – Allow operators to change modes without using a PROGRAM key
B sw – Enable external boom switches (AUX pin3-R,pin4-C,pin5-L)
Fr – French version
LastP – Remember the last knob positions at power up.
L lvl – Use MAT change input as liquid level detection.
Dig – Disable remote Pause/Blast, and use them as digital inputs
smr – summer mode, allow operators to change all functions to MANUAL modes without
using a PROGRAM key
crsblst- Enables the cross conveyor to blast with the main conveyor
OAOff – Disable Over Application Error Messages
joytmr – Enable joystick blast timer
JoyScn – Operator screen defaults to joystick screen.
VoiceOff – Turn off voice readout for spreader functions.
VolAdj – Allow operators to adjust volume without programming key
R Pse- Disables the pause button on the Operator screen
15 GPS Options and WiFi Data Transfer
15.1 GPS – Passive GPS Tracking
To Next Page
Loading...
Need help?
General
