REXROTH CS 550i - Error Codes

36/44
Bosch Rexroth Canada ı May.2018 ı Revision 7.0
3. Press Up and Down buttons on operator screen to adjust Anti-icing rates
16.2 Liquid – Dedicated 3 Boom Anti-icing
Same as the standard 550, see 13.8.
17.2 Liquid – Dedicated 3 Boom Anti-icing
Same as the standard 550, see 13.8.
18 Error Codes
The following error messages are user configurable, both timeouts and controller actions.
Error Description
#
Suggested Solution
ERROR_BLAST_TOO_LONG
1
Turn off blast/time too short
ERROR_DEICE_BLST_TOO_LONG
2
Turn off blast/time too short
ERROR_OVERSPEED
3
Slow down or raise gate
ERROR_SPIN_PROP
4
Check cables, replace coil
ERROR_CONV_PROP
5
Check cables, replace coil
ERROR_CROSS1_PROP
6
Check cables, replace coil
ERROR_CROSS2_PROP
7
Check cables, replace coil
ERROR_NO_MATL_DETECT
8
Load material, check sensor
ERROR_NO_LIQ_DETECT
9
Load material, check sensor