32/44
Bosch Rexroth Canada ı May.2018 ı Revision 7.0
16.5 Spinner Reverse Mode
This mode allows end users to control a Spinner in either forward or reverse direction
by providing two proportional spinner outputs. When an operator click on the R button to
reverse the spinner direction the controller ramps down from the current direction and
ramps up to the opposite direction.
1. Select the Spn Rvs under “Options” menu from the USER screen.
2. System assume the same Min&Max for Spinner reverse output
3. Click ‘R’ button to select spinner forward or reverse operation
16.6 Spinner & Conveyor Reverse Mode
This mode allows end users to control both a Spinner and a conveyor in either forward
or reverse direction by providing dual proportional outputs for each of them. When pressing
the R button to reverse the spinner or conveyor direction the controller ramps down from
the current direction and ramps up to the opposite direction.