3 609 929 B45/2013-06 |
CS351/CC-CS351 Bosch Rexroth AG 57
/108
About This Document
ENGLISH
1 About This Document
This manual contains important information
on the safe and appropriate assembly, trans-
port, commissioning, operation, mainte-
nance, disassembly and simple troubleshoot-
ing of the CS351/CC-CS351 Compact
System.
The description of the software used in the
Compact System is not a part of these in-
structions. For any information on software
and operation which you may require, please
see the online help of the operating program
for BS350 as well as the system documenta-
tion on the enclosed USB system stick.
Read these instructions completely, espe-
cially chapter “General safety instructions”
on page 58 before working with the Compact
System.
Scope of the documentation
This documentation is applicable for the
CS351 and CC-CS351 Compact Systems.
Tightening operations requiring documenta-
tion according to VDI/VDE 2862 Category A
can be performed using tightening systems
which consist of the ErgoSpin hand-held nu-
trunner and the CS351E... Compact System.
Tightening operations requiring documenta-
tion according to VDI/VDE 2862 Category B
can be performed using CC tightening sys-
tems which consist of the CC-ErgoSpin
hand-held nutrunner and the CS351E... or
CC-CS351E-D Compact System.
The CS351... Compact System allows con-
necting the system to field buses.
Related documents
Please also observe the generally applicable,
legal or otherwise binding regulations of Eu-
ropean or national legislation and the rules for
the prevention of accidents and for environ-
mental protection applicable in your country.
CS351_zweispaltig - D.book Seite 57 Dienstag, 16. Juli 2013 12:00 12
To Next Page
Loading...
